Quote:
Originally Posted by CrimsonRockett
On OEM Sideskirts, there are supposed to be tabs like this attached from the inside:
It sandwiches/clips onto the chassis itself and screws on to the left of it (which is why the holes on the rear section of OEM sideskirts is off to the side). It is only meant to hold the sideskirt in place. You still need to run a strip of double sided tape along the lower rocker panel to keep it firmly in place.
Most people don't include these and do what has been mentioned above. You can drill new holes and bolt them up that way, but if you're picky like I am, you'll either source the metal tabs or make your own.
Hope that helps. |
Thanks man really appriciate it. I knews there had to be something it attached to