View Single Post
Old 08-09-2012, 03:38 PM   #26
fliprayzin240sx
Man w/ CTSV & a Car Seat
 
fliprayzin240sx's Avatar
 
Join Date: Aug 2002
Location: Tampa
Posts: 17,998
Trader Rating: (19)
fliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfectionfliprayzin240sx is close to perfection
Send a message via AIM to fliprayzin240sx
Quote:
Originally Posted by 2stepGoesPowPow View Post
clutch fan didnt come, i need to drive 20 miles for my alignment... im gunna loop it in an hour and take my hood off and then begin my journey, hopefully itll be alright lol
Loop it, refill coolant, jack the front of the car as high as possible, turn the car on, massage the upper radiator neck while continuing to topping off the radiator.

You said you got a swirl pot? If you have a swirl pot, one of the nipple is connected to the bleeder cap on the upper radiator neck right? If this is the case, keep massaging the upper radiator line with the radiator cap off. Once it starts getting hot and you stopped seeing bubbles come out, put the cap unpressurized cap on the radiator. Fill the swirl pot and keep it topped off, keep massaging the upper radiator line. Just to make sure there is absolutely no more bubble in the lines and engine, then close off the swirl pot.
__________________

If you think Zilvia has too many assholes...
CLICK HERE!!!
fliprayzin240sx is offline   Reply With Quote