Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

Fidel Cashflo · 08-28-2012, 02:13 PM

I have a few SR manifolds lying around my shop that I welded TIAL 38mm flanges to, this allows you to use an external wastegate and stock manifold/stock turbo location. This is seriously the kicker for making good power/torque on a small frame/bottom mount turbo. $125 each or $160 each ceramic coated black!
Stock SR manifold, bored a hole into it/welded a 38MM flange in place.

Also, if there are any of you with Pulsar GTi-R's or FWD SR20det motors, I can do this with your manifolds also. Just PM me.

08-28-2012, 02:13 PM	#1
Fidel Cashflo Zilvia Member Join Date: Jul 2009 Location: Tampa Age: 34 Posts: 176 Trader Rating: (-1)	SR20 external wastegate manifold I have a few SR manifolds lying around my shop that I welded TIAL 38mm flanges to, this allows you to use an external wastegate and stock manifold/stock turbo location. This is seriously the kicker for making good power/torque on a small frame/bottom mount turbo. $125 each or $160 each ceramic coated black! Stock SR manifold, bored a hole into it/welded a 38MM flange in place. Also, if there are any of you with Pulsar GTi-R's or FWD SR20det motors, I can do this with your manifolds also. Just PM me. Last edited by Fidel Cashflo; 10-01-2012 at 06:00 PM..