|
So heres a new one.
If the rocker arm cannot be pressed down, that is, if there is no play in the lifters plunger when the rocker is pressed with a finger; then that means that the lifter is full of oil, amirite ?
The FSM seems to specify that this is so "the rocker should not move 1mm or more", but my question is, what if the lifter is approx 80% full of oil, that seems to indicate that the rocker will move 20% of it's lifter's plunger's cavity filled with air, which may not be "1mm or more". So at that point, would I take all the lifters out (assuming they all deflect 20% or so, < 1mm) and re-bleed then reinstall and re-check?
|