Quote:
Originally Posted by zooopreme
Yes, and that is the very resistor needed. However, you need to find some place to mount it. Resistors get very hot which can ruin paint/melt plastic and since the wiring is near the wheel wells, it can get wet or dirty.
Also, you probably have the DMAX ones that aren't dual filament. There are two models that they put out. One can serve as dual function and the other is just like the OEM position light.
|
Ding-Ding! You're correct! DMAX sells two models for the 180SX Kouki styled position lights, make sure you're getting the correct one.
And if you have the correct one (two bulb locations per one housing) DON'T use the supplied LED from DMAX if you
do not want the rapid/hyper blinking/flashing.. Just stick an appropriately sized automotive incandescent bulb in there and done!