Quote:
Originally Posted by bladetech8
Ding-Ding! You're correct! DMAX sells two models for the 180SX Kouki styled position lights, make sure you're getting the correct one.
And if you have the correct one (two bulb locations per one housing) DON'T use the supplied LED from DMAX if you do not want the rapid/hyper blinking/flashing.. Just stick an appropriately sized automotive incandescent bulb in there and done!
|
did that, I have white LED's for the running lights, but normal wedge type incandessent bulbs for the turn signal's.
They are the DMAX Dual position light / winker. with the 2 bulbs in the housing. not oem replacement ones. I already had Origin ones to replace the oem ones.
I found a relay that plugs into the factory harness under dash locally, it allows led turn signal's at a normal pace vs rapid blink.