Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

iLOVEASIANGIRLSS · 12-01-2012, 02:19 PM

"FYI: The fuel level sender on the 95 (Pre-OBDII) has 3 pins out, and the 96+ (OBDII) has 4 pins out.

I haven't downloaded the '96 FSM to see what the testing procedure is, but just probing each of the 4 pins with an ohmmeter shows that the resistance changes when the float is at different positions. I suspect that it works, but I can't verify it yet. I'm not sure if you could use a 96+ fuel sender in a '95 tank or not. Physically, I believe that they're the same, so all of the brackets will fit. The only concern is if you can drop one of the wires/remove it and still use it.

If anyone needs a '96 fuel level sender, get in contact with me and we'll work out a price and I'll verify that it works."

i searched a little harder and found this, this is the problem i encountered, is there any way to use the 96 OBDII tank on my 95 s14?

12-01-2012, 02:19 PM	#2
iLOVEASIANGIRLSS Zilvia Member Join Date: Sep 2010 Location: Garden Grove, Southern California Age: 33 Posts: 297 Trader Rating: (3)	"FYI: The fuel level sender on the 95 (Pre-OBDII) has 3 pins out, and the 96+ (OBDII) has 4 pins out. I haven't downloaded the '96 FSM to see what the testing procedure is, but just probing each of the 4 pins with an ohmmeter shows that the resistance changes when the float is at different positions. I suspect that it works, but I can't verify it yet. I'm not sure if you could use a 96+ fuel sender in a '95 tank or not. Physically, I believe that they're the same, so all of the brackets will fit. The only concern is if you can drop one of the wires/remove it and still use it. If anyone needs a '96 fuel level sender, get in contact with me and we'll work out a price and I'll verify that it works." i searched a little harder and found this, this is the problem i encountered, is there any way to use the 96 OBDII tank on my 95 s14? __________________ Pearl White 95 base S14 Last edited by iLOVEASIANGIRLSS; 12-01-2012 at 03:47 PM..