View Single Post
Old 02-01-2013, 10:15 PM   #3
rcdad123
Zilvia Addict
 
rcdad123's Avatar
 
Join Date: Jul 2011
Location: san diego
Posts: 639
Trader Rating: (0)
rcdad123 is an unknown quantity at this point
thanks for the informative reply. i don`t have a manifold yet because he just mentioned it today. also, i found a used t3 turbine housing with a .63 a/r. i like the .63 a/r on my last 2.4 litter engines. the seller did not give any specs on the turbine housing other than it`s a t3 and .63a/r. the manifold i`m gonna have built will be single scroll(much cheaper than a twin scroll), and will have short runners. do you think the t3 turbine would work on the gt3076 that my friend have? also im not worried about the extra 50 hp up top that a bigger a/r would give me because i`m sticking with the stock cams on a ka24de. it will have forge 20 over bore pistons with I beam rods, head studs, 620cc injectors(i have left over from a previous build), stock compression, aeromotive fuel pump, and an evo xiii stock intercooler. looking for 350whp on e85. the s2k that the turbo is on right now makes 580whp.
rcdad123 is offline   Reply With Quote