[racepar1]

This is a pair of JIC camber plates off an older set of JIC coilovers. The plates are a little rusty and not the prettiest, but the bearings do not have play and move freely. One of the lock bolts is missing, but they can be used perfectly safe and reliably without it. A replacement bolt can be sourced at any hardware store. The nuts and spacers are also included. The nuts are M13x1.5mm thread size and pitch and will fit MOST coilovers. The nuts will not work with stock shocks or TEIN coilovers as the thread is different, M12x1.5mm IIRC. TEIN does sell replacement nuts though so those can be purchased to use the plates with stock shocks or TEIN coilovers.

SOLD!