View Single Post
Old 08-04-2013, 08:08 PM   #1
bmar19
Zilvia Junkie
 
Join Date: Jul 2013
Location: Broward
Posts: 563
Trader Rating: (4)
bmar19 is an unknown quantity at this point
KAT help rough dying idle...urgent

UPDATED!!!!!

VIDEO LINKS PLEASE LOOK
does have open downpipe

http://www.youtube.com/watch?v=gglUXjL956U thought it was the battery but it doesnt always start some reason

http://www.youtube.com/watch?v=ACIY3YC7Cvw some screech sound in this one...not sure

http://www.youtube.com/watch?v=hEsl3HmZF5s just wont idle

what does these symptoms show


ok so i just installed my enthalpy ecu, nismo injectors 555cc, and moved my maf z32 to the intake side and wired it up (blow through)

problem is when i started it up the idle was super rough and would die...if i rev it up it shakes the car i see the steering wheel move....but it wont idle if i dont give it gas it will just go up and down and die

not sure if its timing or what...martin at enthalpy had me set my timing to 20 degrees

im just vary confused i was expecting to not have such a bad idle like this

can some of you experts and guys that know some things please help

i showed a picture of my distributer to martin and he told me to rotate it clockwise a certain amount and i did not sure if thats why i just did what he said...please let me know thanks!!!!!!

i really need this car going by this weekend coming up

Last edited by bmar19; 08-05-2013 at 05:03 PM..
bmar19 is offline   Reply With Quote
Sponsored Links