Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - 1UZFE into S-Chassis

turtle m3th · 08-10-2013, 01:53 AM

Also, here is my simple sway bar solution for you guys! dug this up from my vh45 days.

here's a stock sway bar that was bent using heat and some muscle!

Notice how it lays flat on the ground compared to an unmodified sway bar? This is what offers the additional clearance needed.

stock for comparison

I don't have any install pics, but my buddy has been rocking it for some time without fail. Give it a shot folks! I prefer to rock the stock front sway, so this was a great and cost effective solution for me. This also clears lsx swaps and possibly I6 swaps.

08-10-2013, 01:53 AM	#9
turtle m3th Nissanaholic! Join Date: Mar 2005 Location: San Diego Age: 38 Posts: 1,608 Trader Rating: (41)	Also, here is my simple sway bar solution for you guys! dug this up from my vh45 days. here's a stock sway bar that was bent using heat and some muscle! Notice how it lays flat on the ground compared to an unmodified sway bar? This is what offers the additional clearance needed. stock for comparison I don't have any install pics, but my buddy has been rocking it for some time without fail. Give it a shot folks! I prefer to rock the stock front sway, so this was a great and cost effective solution for me. This also clears lsx swaps and possibly I6 swaps. __________________ "cigarettes killed my father, and raped my mother!"