Quote:
Originally Posted by fliprayzin240sx
Needing rebuild for 900-1100? Bullshit since you can get a new for that much...I got 2 TS2B clutches. Now, you asking for $800 for this is a good price considering rebuild kits for these goes for $700-800. Plates look like they're brand new plates so these are definitely a used clutch with fresh rebuild plates.
These clutch looks like Os Giken TS2BD.
|
Not to be an ass, but the clutch disks look new, but the floaters definitely look used AND resurfaced (look at the heat marking on the outer location tangs). One thing to watch out for on multi-plate clutches is your stack up height. They are usually only rated to 0.030-0.040" of total wear, so if each floater is resurfaced 0.020", you're already at your wear limit with brand new disks. The flywheel is the same story (needs a set step height).
Most people don't know this, then blame the clutch when they smoke it in 5k miles after a "rebuild" with an insufficient stack height.
Some measurements compared to OS Giken specs will help your sale OP.