Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - Cas timing issues on a freshly swapped sr20.

cotbu · 11-05-2013, 11:43 AM

I don't know Ben, but if you trust him, you trust him. I'm just saying close enough is not, right/correct. Moving the chain is my suggestion, because I always set the chain correctly or you have to adjust everything, with the notion timing is off a tooth. I'm about to check torque on my head studs, so the mechanical timing
Should be the same as when I set it, I can also look at the cas and my marks to make sure it where I set it, think of it as a blueprint.

Sent from my Highly Tune Galaxy S3.4!!!

11-05-2013, 11:43 AM	#4
cotbu Post Whore! Join Date: Sep 2005 Location: SWFL Age: 50 Posts: 3,318 Trader Rating: (3)	I don't know Ben, but if you trust him, you trust him. I'm just saying close enough is not, right/correct. Moving the chain is my suggestion, because I always set the chain correctly or you have to adjust everything, with the notion timing is off a tooth. I'm about to check torque on my head studs, so the mechanical timing Should be the same as when I set it, I can also look at the cas and my marks to make sure it where I set it, think of it as a blueprint. Sent from my Highly Tune Galaxy S3.4!!! __________________ LoverTechnologies "Half Broken Things!" Last edited by cotbu; 11-06-2013 at 11:12 AM..