Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

SilvviaS14 · 09-22-2004, 07:38 AM

I'm looking for a low offset (under +25 mm, but it depends on how wide the wheels are) set of 16" wheels in excellent condition.

Three piece with a polished lip is preferred, but any lightweight set of wheels will do the trick.

They need to be at least 16" x 8" in the rear, 16" x 7" in the front is fine, or 16 x 8" all around. They need to be 4 x 114.3 bolt pattern.

Ideally I'd like them with tires mounted, but only if the rear tires are at least a 245 series width...fronts can be a 215 series width and up.

I have a set of 15" x 7" +17 mm offset three piece w/polished lip Work Ewing III wheels in excellent condition with very nice tires that I could trade for 16" wheels as well.

Email me with offers, pictures, etc.

[email protected] (preferred)

OR

[email protected]

09-22-2004, 07:38 AM	#1
SilvviaS14 Leaky Injector Join Date: Mar 2003 Location: Connecticut Posts: 105 Trader Rating: (0)	WTB: Low offset 16" wheels or wheelset I'm looking for a low offset (under +25 mm, but it depends on how wide the wheels are) set of 16" wheels in excellent condition. Three piece with a polished lip is preferred, but any lightweight set of wheels will do the trick. They need to be at least 16" x 8" in the rear, 16" x 7" in the front is fine, or 16 x 8" all around. They need to be 4 x 114.3 bolt pattern. Ideally I'd like them with tires mounted, but only if the rear tires are at least a 245 series width...fronts can be a 215 series width and up. I have a set of 15" x 7" +17 mm offset three piece w/polished lip Work Ewing III wheels in excellent condition with very nice tires that I could trade for 16" wheels as well. Email me with offers, pictures, etc. [email protected] (preferred) OR [email protected] __________________ 95 S14 KA-T. BOO YA http://www.angelfire.com/theforce/ka24det/index.html