[Bleakley]

Hope this is in the right section.
I have zero experience and limited knowledge about boost controllers.. I am constantly learning by reading and searching, but that seems to really only get me so far.
Setup right now is a stock redtop SR with light mods (IC, Exhaust, etc.), but the project will be ramping up rather quickly.
Do not have much set in stone as I am still debating my setup. What I do know is I am going VE/VVL and will be making over 400 wheel (and will be seeing boost levels as high as 25 psi)...... Eventually... (GT2871 or GT3071/76, leaning towards the 3076..)

I am fishing for information from you kind folks on what you are running and what you have had experience with (feel free to let me know your setup, too). My questions are:

1) Will I be able to buy one and it do the job for the stock setup and it can just carry over to the projected end results or am I better off/will be buying another one down the road
and
2) What do you recommend for me. What are you running, why'd you pick it, what do you like about it, etc. Also, I notice some people saying something about some of the EBC's not happy over or around 20 psi. These for me will be unacceptable as I will more than likely be operating @ 21/22 - 25 psi.

Thank you in advance for any and all the information and expertise you guys have, and thanks for helping me out. And, if it helps, I am looking at what seems to be the obvious choices... Apexi AVCR, Greddy Profec, etc