Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

skatanic28 · 10-20-2004, 04:31 PM

you wired it according to the manual right?
make sure you used the yellow and white, not pink and orange for the mafs wiring. set it to hotwire 5. 1in-1 out. then set to 4 cyl and make sure the tps is going up and to the right. you can go to the sensor check screen to verify everything is working correctly. the tps voltage should go up when you press the gas, and the mafs voltage should rise. the afl usage should be pretty low at idle, probably between 1 and 5.
get me on AIM if you want to talk about wiring and settings, itll be easier that way. AIM sn = skatanic28

btw....did you have the safc installed before you put the 370's in?

10-20-2004, 04:31 PM	#11
skatanic28 Zilvia Junkie Join Date: Oct 2002 Location: ny Age: 41 Posts: 443 Trader Rating: (0)	you wired it according to the manual right? make sure you used the yellow and white, not pink and orange for the mafs wiring. set it to hotwire 5. 1in-1 out. then set to 4 cyl and make sure the tps is going up and to the right. you can go to the sensor check screen to verify everything is working correctly. the tps voltage should go up when you press the gas, and the mafs voltage should rise. the afl usage should be pretty low at idle, probably between 1 and 5. get me on AIM if you want to talk about wiring and settings, itll be easier that way. AIM sn = skatanic28 btw....did you have the safc installed before you put the 370's in?