|
Pending on how narrow/wide your seat is and how the brackets sit you could possibly have the base of the seat drop in between the 2 planted brackets which are mounted to the chassis and sit the seat more or less on the floor.
You may need to drill some new holes on the side plates if the width of the seat/bracket allows you to do this.
If you cant do that, what we have done in the past is cut off the end of the brackets which mount to the chassis, position the seat in the car where you want it, angle the ends of the brackets as needed, and then tack them in place, pull everything out, and weld it up solid and reinforce it.
|