View Single Post
Old 04-30-2015, 09:20 AM   #5
PoorMans180SX
Zilvia.net Advertiser
 
PoorMans180SX's Avatar
 
Join Date: Nov 2005
Location: Michigan
Age: 37
Posts: 5,616
Trader Rating: (16)
PoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfection
Send a message via AIM to PoorMans180SX
Quote:
Originally Posted by Prok0 View Post
Remove the intake pipe, check to see if there is oil in the housing, also see if there is any side to side or in and out shaft play on the compressor wheel.

If that checks out, re-install the intake pipe, boost leak test the car, if there is no leaks there double check your wastegate or wastegate actuator to make sure the diaphragm isnt torn.

I would start with checking those few things.
Yes, follow the steps above.
__________________
Build: http://zilvia.net/f/showthread.php?t=643065

Friends don't let friends buy knock-offs.
PoorMans180SX is offline   Reply With Quote