Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

Donedreamin · 06-19-2020, 10:48 PM

Hey,

I have a 180SX. Installed some Z32 brakes, front and rear as well as the BMC. Trying to bleed the brakes and I can't seem to bleed the rears. Front bleed well. I bench bled the master and vacuum bled. It seems to push the ever so slightest amount of fluid. But not enough to engage the pads on the rotor. It's not easy to track down a BMC to slave it and before I purchased another one, I figured I would reach out to verify I'm not doing anything wrong..

06-19-2020, 10:48 PM	#1
Donedreamin Join Date: Jan 2009 Location: Saskatchewan Posts: 41 Trader Rating: (0)	Bleeding brake issue Hey, I have a 180SX. Installed some Z32 brakes, front and rear as well as the BMC. Trying to bleed the brakes and I can't seem to bleed the rears. Front bleed well. I bench bled the master and vacuum bled. It seems to push the ever so slightest amount of fluid. But not enough to engage the pads on the rotor. It's not easy to track down a BMC to slave it and before I purchased another one, I figured I would reach out to verify I'm not doing anything wrong..