[Super_OK_S13]

Originally Posted by Dolph_KYAS13

These are neat but would look really good with nice hardware. Not to be nit picky . the transformation is killer.

On the oem grilles the hardware is hidden pretty deep so these heads weren't seen as easy, but if i can find some button head/hex/sheetmetal screw ill definitely change them out for that. I dont think those screw+washer dress up hardware will be small enough to be not as noticeable.

Originally Posted by BryanSayWhat

Nice work on the overs and front fenders!

Is the 205/45 close in the front, or could you go with a wider tire if you wanted?

Thanks! The 205/45 is pretty tight. It rubs at full lock too.. If i put the 215/45 on, I'd have to run a little more camber. I should have bent the arch out a little bit more but i didn't want a huge buldge on the front fenders vs the rear. On the camber plate, its like 2 notches from full negative adjustment.

Originally Posted by souljaseth33

Wow this came out great!

Thanks !!!

Originally Posted by tuzzio

Looks awesome man, good stuff. Also, 3M VHB double sided tape is some strong stuff. Really helps keep the valances on the quarters

Thanks!! I'll have to look for that stuff, i used to have some servo tape that was really strong for my R/C car stuff.