|
the turn signals are pretty much straight forward. they share a ground with the parking bulbs and the connector on the headlight itself is a 3 pin. what you will need to do is cut the turn signal harness on your car (for the front turns, not for the side ones) and use spade connectors to connect them to the actual connectors on the headlights. if you follow the wires from the turn signal's bulb you will be able to tell which pin on the connector to hook it up to. of course you will need to wrap any exposed wires in electrical tape, etc. if/when you hook up your sidemarkers, then you will use the side turn signals for those.
hope that helps.
|