Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

agrabau · 05-31-2005, 06:34 PM

Guys, we're nearing the end of my questions here. ..

My S13 ECCS printout shows a red wire leaving the ECU from pin 4 and entering the ECCS relay at Pin 2. What does that wire do? It terminates in the fenderwell area on a Nissan along with the ECU power, backup power etc.. I don't see any instructions on where to hook it up but I have a feeling it's important. (looks like a signal for the ECCS relay) what a nightmare. The ECCS feeds the ECU which feeds it.

My car ran today for the first time. It sounded like absolute garbage but it ran.

Also, if someone is feeling generous, a testing method to test functionality on the CAS.

Please help guys. I have over a year in this project.

Alex

05-31-2005, 06:34 PM	#1
agrabau Leaky Injector Join Date: Jan 2005 Location: Boston Posts: 78 Trader Rating: (0)	ECU pin 4 S13 ECU Identification please Guys, we're nearing the end of my questions here. .. My S13 ECCS printout shows a red wire leaving the ECU from pin 4 and entering the ECCS relay at Pin 2. What does that wire do? It terminates in the fenderwell area on a Nissan along with the ECU power, backup power etc.. I don't see any instructions on where to hook it up but I have a feeling it's important. (looks like a signal for the ECCS relay) what a nightmare. The ECCS feeds the ECU which feeds it. My car ran today for the first time. It sounded like absolute garbage but it ran. Also, if someone is feeling generous, a testing method to test functionality on the CAS. Please help guys. I have over a year in this project. Alex Last edited by agrabau; 05-31-2005 at 07:56 PM..