Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

bboyt3nsk · 06-05-2005, 10:43 AM

Under my dash where the ECU is your supposed to connect the wires for the tach and speedo and the ignition. The ignition is my main problem. I have an orange wire coming off my SR wiring harness (its supposed to be for ignition) but nothing off the KA harness to connect it to, I mean no orange wire that connects to it.
The problem my car is having is it will turn over and will start and run ONLY when i prime it with gas in the intake manifold. I am pretty sure that my injectors are not firing. I bought a new CAS ECU and wiring harness and new fuel filter and my fuel pump is putting out more then enough PSI.

I have a 1990 240SX with a redtop

06-05-2005, 10:43 AM	#1
bboyt3nsk Zilvia Member Join Date: May 2005 Location: Cleveland Age: 39 Posts: 222 Trader Rating: (0)	Orange wire problem Under my dash where the ECU is your supposed to connect the wires for the tach and speedo and the ignition. The ignition is my main problem. I have an orange wire coming off my SR wiring harness (its supposed to be for ignition) but nothing off the KA harness to connect it to, I mean no orange wire that connects to it. The problem my car is having is it will turn over and will start and run ONLY when i prime it with gas in the intake manifold. I am pretty sure that my injectors are not firing. I bought a new CAS ECU and wiring harness and new fuel filter and my fuel pump is putting out more then enough PSI. I have a 1990 240SX with a redtop __________________ "General Motors: Because someone has to make rental cars"