Call a buddy
Tools needed:
One friend (buddy), 27mm socket, 1/2 drive 19mm socket, breaker bar, and 1/2 drive ratchet, and the pipe.
- Put the 27mm socket on the breaker bar and have your buddy hold it on the main crank pulley bolt. (breaker bar should be long enough that he can hold it up in the engine bay)
- You, yourself take the 19mm socket on the ratchet and use that (with the bar for leverage) to loosen the flywheel bolts.
Your buddy holding the main crank pulley will stop the engine (and flywheel of course) from turning, with a little froce (the longer the pipe the easier it is) you should be able the crack all the bolts
|