Quote:
|
Originally Posted by Supreme
I was serious since I did not know (personally) how it worked, but thanks for answering my question 
Is a lot of modification needed to make the rhd work on our lhd? |
Not really. Basically you'll set it where it needs to mount, then drill the tower and use spacers behind it to set it flat against the MC. It's designed to sit flush against the tower and IIRC there's a few ridges in the same place on the other side. Your main concern is to get it as flat against the tower as possible, maybe even go as far as to cut a plate and sandwich the shock tower for more rigidity.