[john891]

hey guys, I just got my enthalpy tuned ECU back in today and attempted to get her running by tonight..

after the injectors leaking becasue I forgot to put in the stock O-rings, the car fired right up. Although the car runs, it runs like crap.

set-up: GT2871R
z32 MAF
sard 550's
enthalpy tuned ECU

the car has the symptoms of a bad MAF. Idles bad, and doesnt rev smooth. When I unplug the the maf It runs the same as when it is plugged in. I have tried rewiring it twice and still nothing.

Also, A LOT of gray/black smoke it comming from the exhaust... this has me worried. Could it be becasue the car is runnng so rich becasue of the MAF?

The boost guage reads about 18-17 of VAC. Im used to it being about 20 with the stock turbo, could there be a boost leak?

After tryign to rewire the MAF and fix possible boost leaks I started the car and it was still the same, smoke pouring from the exhaust. When I put my hand infront of the muffer I got a black liquid residue on all over it. UNBURNT FUEL?

ANY help would be appreciated, as I have searched relentlessly.