Quote:
|
Originally Posted by Jonnie Fraz
Indolent...sorry to hear about your bad investment. Sounds to me like you will need another short block at least, like previously posted. Just a little information, if the starter will not spin the motor then you have a problem, but by trying to push start it you may have caused a bigger prob. First thing you should have done was pull the plugs and try to crank it with a socket. By push starting you could have bent a rod or valves or God knows what else. Your first problem may have been as simple as hydrolock in 1 cylinder. Building a project car on a part time buget can be very taxing, you might want to do a little more research before jumping into things.
|
From reading the posts.. I think you could tell that the problem isn't INDOLENT's.. it's bardabe's..