Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - correct brake set-up facts

sncs14 · 12-05-2005, 12:47 PM

docrice, i have the iron 30mm z brakes up front with stock kouki s14 brakes in the rear and the nabco 17/16 bmc. i had the stock 7/8 mc for close to two years before i swapped it for the 17/16 half a year ago(yes, bending the hard lines was a PITA). it is a great improvement, but i wanted to run the setup the way it was supposed to be ie correct mc, and booster for non-ABS kouki S14. then decide which feels better. it is my understanding that some of the European 200sx were left hand drive, so there should be a correct bmc somewhere. i just need to figure out exactly what the part # is.

hypertek, i'm going to look into the FA writeup if i can find it. thanks

12-05-2005, 12:47 PM	#8
sncs14 Zilvia FREAK! Join Date: May 2005 Location: Las Vegas Age: 42 Posts: 1,003 Trader Rating: (1)	docrice, i have the iron 30mm z brakes up front with stock kouki s14 brakes in the rear and the nabco 17/16 bmc. i had the stock 7/8 mc for close to two years before i swapped it for the 17/16 half a year ago(yes, bending the hard lines was a PITA). it is a great improvement, but i wanted to run the setup the way it was supposed to be ie correct mc, and booster for non-ABS kouki S14. then decide which feels better. it is my understanding that some of the European 200sx were left hand drive, so there should be a correct bmc somewhere. i just need to figure out exactly what the part # is. hypertek, i'm going to look into the FA writeup if i can find it. thanks Last edited by sncs14; 12-05-2005 at 02:43 PM..