|
Damn I was afraid this will come up soon. But you never really read the write up it looks like. Hmmm SET is a % of the Solenoid, Gain is a % and start boost should be in PSI. what is yours in kpa or psi? Read your boost controller to see what are the units, because it says it....
18 PSI is probably a SET value of around 55% which is correct, your gain should be around 28-35 (Test this slowly because this is a major component. If too high you WILL boost spike). Same with the start boost which if you are boosting 18 psi it should be at 16psi. If your boost controller is NOT in psi units, read f....ing page 14 in your manual to change it. Trust me it works, just read your manual more...... Good Luck
These settings are assuming you have a T28 Turbo. To me it seems like you are turning knobs and not understanding what you are doing... good way to blow your turbo bro..... Do everything slowly.... and don't jump the gun
|