Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

smithers584 · 04-05-2006, 06:04 PM

ok well i finally got it off, but heres my ?. on the plug that goes into the main harness, there are 2 pins and to wires ,i followed from those pins down the pigtail towards the sensor. when i look at that plug, i only find one pin and one wire going into it, with the second wire stripped and wrapped around the first one. does the second wire need to be hooked up? please help, daily driver down.

04-05-2006, 06:04 PM	#1
smithers584 Zilvia Junkie Join Date: Dec 2004 Location: sc Posts: 416 Trader Rating: (0)	knock sensor ok well i finally got it off, but heres my ?. on the plug that goes into the main harness, there are 2 pins and to wires ,i followed from those pins down the pigtail towards the sensor. when i look at that plug, i only find one pin and one wire going into it, with the second wire stripped and wrapped around the first one. does the second wire need to be hooked up? please help, daily driver down.