Quote:
|
Originally Posted by DUBCITY
Got my Nismo thermostat and SR radiator shroud which helped a lot, but i still see the temp gauge climb ever so slightly at random times, then back down. Im guessing it might be air bubbles. I ordered a water temp gauge and will probably hook the heater back up (i had bypassed it). I thought i got all the air out, but i guess you never really know. let you guys know how that works. any other suggestions?
|
ok after those 2 things, get these.
bleed more coolant. If it's not taking you at least 30 min. to bleed, your not doing it right. Sometimes if it's really bad, it can become a 2 person job b/c someone has to hold the throttle and do the heater controls from hot to cold
also get a real temperature gauge. the stock one was prolly never that accurate to begin with and then add 10+ years to that and you get the idea.
p.s. question- when you guys get an aftermarket gauge, where and how do you put the sensor? is there a cheaper way of putting it in the rad. hose?