Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

BEISSEN · 06-17-2002, 07:42 PM

When toy paint the valve the valve cover make sure that you wait until the cover is cool.Then sand and make sure everything is smooth.But as far as the gasket goes make sure there is no tears in the gasket and if not get some ultra grey or black rtv silicone.But make sure that is is meant to go on a valvre cover.Just read the back of the package and see what it says.Then just put the silicone where the bumps are in the gasket there are two in the front and two in the rearline the silicone on the cover its self whee the gasket will go and on the engine area where the gasket sits and you will be ok.

06-17-2002, 07:42 PM	#3
BEISSEN Zilvia FREAK! Join Date: Nov 2001 Location: Woodbridge,VA Age: 42 Posts: 1,028 Trader Rating: (0)	When toy paint the valve the valve cover make sure that you wait until the cover is cool.Then sand and make sure everything is smooth.But as far as the gasket goes make sure there is no tears in the gasket and if not get some ultra grey or black rtv silicone.But make sure that is is meant to go on a valvre cover.Just read the back of the package and see what it says.Then just put the silicone where the bumps are in the gasket there are two in the front and two in the rearline the silicone on the cover its self whee the gasket will go and on the engine area where the gasket sits and you will be ok.