Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

*fliprayzin240sx* · 07-30-2006, 11:42 PM

The bung on the manifold is a bung for a Exhaust Gas Temperature gauge. Its not stock so plug it for now, keep it there if you ever decide to get a EGT gauge. As for the drivershaft...thats the dust cover boot. If your using the stock USDM drive shaft, just knock the boot off. You dont need it in there. Knock that piece off the end of the tranny.

07-30-2006, 11:42 PM	#5
fliprayzin240sx Man w/ CTSV & a Car Seat Join Date: Aug 2002 Location: Tampa Posts: 17,998 Trader Rating: (19)	The bung on the manifold is a bung for a Exhaust Gas Temperature gauge. Its not stock so plug it for now, keep it there if you ever decide to get a EGT gauge. As for the drivershaft...thats the dust cover boot. If your using the stock USDM drive shaft, just knock the boot off. You dont need it in there. Knock that piece off the end of the tranny. __________________ If you think Zilvia has too many assholes... CLICK HERE!!!