|
Resetting your ecu is easy. Goto www.240sx.org and goto the FAQ link.
Your ECU is located behind the passenger firewall kickpanel. Unscrew the four 10mm bolts and rotate it around so that you can access the flathead screw (used to manipulate the diagnostic modes). Follow the instructions in the FAQ for specifics, but basically you will turn on your ignition, turn the screw clockwise to desired diagnostic mode, start the car, read the code, turn screw back to original position.
Its easy, no need to pay the Nissan dealer 50 bucks to read a LED for you.
Ciao
|