Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

rhit240sx · 08-28-2006, 12:08 PM

I just "finished" installing the car on my '95 240sx, but the car won't start. I turn the key and the dash lights come on and then nothing, if I try again the lights won't even come on. The rest of the alarm works fine, the doors lock/unlock and the alarm goes off when I open the hood or door. Anyone have any ideas?

I looked at it again, and the fuse wasn't blown, it just stops working for a while. I am going to recheck all my wiring to look for a short. I used the Black/Yellow wire for the starter connections, should I have used the Black/White one? Also I haven't done anything with the clutch bypass yet, could that be causing it?

08-28-2006, 12:08 PM	#1
rhit240sx Join Date: Jul 2004 Location: OH Posts: 23 Trader Rating: (0)	Viper 791xv Problem I just "finished" installing the car on my '95 240sx, but the car won't start. I turn the key and the dash lights come on and then nothing, if I try again the lights won't even come on. The rest of the alarm works fine, the doors lock/unlock and the alarm goes off when I open the hood or door. Anyone have any ideas? I looked at it again, and the fuse wasn't blown, it just stops working for a while. I am going to recheck all my wiring to look for a short. I used the Black/Yellow wire for the starter connections, should I have used the Black/White one? Also I haven't done anything with the clutch bypass yet, could that be causing it? Last edited by rhit240sx; 08-28-2006 at 03:30 PM..