Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

bombinha · 09-24-2006, 08:48 AM

Ok Guys I have researched here and didn't find anything about it.
So the point is I do have bad subframe bushings and I disasemble my rear suspension and they surely fall a part just the bushing of course.
I have all 4 nismo competition new subframe bushing to put in but I can't remove the old ones. I try to hammer them I put tons of WD40 and other lubes but thaey are such way sitcky due rust. I also try a puler but no succes due the area with not to much space.
I have a S14 1995 240SX and mostly stock.
I was have a bad wheel hop and when I took a look on my subframe bushings and notice they were so bad that the screw was not vertical and aligned anymore due the middle of the bushing already wear out.
So if anyone could give me an idea on how to remove the old bushing in order to put the new ones would be appreciated.
Thank you.

09-24-2006, 08:48 AM	#1
bombinha Join Date: May 2006 Location: Lafayette, LA Posts: 5 Trader Rating: (0)	Subframe bushings. Need help removing. Ok Guys I have researched here and didn't find anything about it. So the point is I do have bad subframe bushings and I disasemble my rear suspension and they surely fall a part just the bushing of course. I have all 4 nismo competition new subframe bushing to put in but I can't remove the old ones. I try to hammer them I put tons of WD40 and other lubes but thaey are such way sitcky due rust. I also try a puler but no succes due the area with not to much space. I have a S14 1995 240SX and mostly stock. I was have a bad wheel hop and when I took a look on my subframe bushings and notice they were so bad that the screw was not vertical and aligned anymore due the middle of the bushing already wear out. So if anyone could give me an idea on how to remove the old bushing in order to put the new ones would be appreciated. Thank you.