Quote:
|
Originally Posted by realnez
I talked to my friend and he said he had the same symptoms and it was his injector O rings. I did put them in and I have never done it before so that might be it. But that wouldn't explain the overheating, or would it?
|
no for the overheating.
but here's how you do it properly
1. use new o-rings.
2. lube them up with motor oil or something similar
3. twist and push *by hand* until you feel them snap into place
if they are leaking it will flood affected cylinders while parked and dilute your oil with gas. you'll be able to smell strong gas with the oil cap off.