Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

nissandr1ft · 12-20-2006, 11:56 AM

I'm having problems with my mainly stock KA breaking up at High RPM's. I'm basically gonna do a basic tuneup to make sure the plugs, cap, and rotor are good. I doubt thats the problem so I wanted to check my fuel pressure, but the only pressure tester I have isnt an inline tester like shown in the FSM. If I just put a pressure tester on the feed line, and put the key in the ON position what should my readings be? I tried it earlier, and only showed 20lbs, where as with the inline tester the FSM shows 34lbs with vacuum, and 43lbs with no vacuum.

Steven

12-20-2006, 11:56 AM	#1
nissandr1ft Zilvia Member Join Date: Sep 2004 Location: Clayton, NC Age: 41 Posts: 284 Trader Rating: (0)	Fuel Pressure? I'm having problems with my mainly stock KA breaking up at High RPM's. I'm basically gonna do a basic tuneup to make sure the plugs, cap, and rotor are good. I doubt thats the problem so I wanted to check my fuel pressure, but the only pressure tester I have isnt an inline tester like shown in the FSM. If I just put a pressure tester on the feed line, and put the key in the ON position what should my readings be? I tried it earlier, and only showed 20lbs, where as with the inline tester the FSM shows 34lbs with vacuum, and 43lbs with no vacuum. Steven __________________ ------------------------- www.carolinanissans.com -------------------------