Quote:
|
Originally Posted by R240NA
Problem is you're on the wrong wire. Tach signal to the ECU on the engine harness side is Y/R, not Y/B.
|
It just so happens that All the SR FSMs are missing page EL 115/114 which is the diagram for the cluster/tach. So all i have to go by is whats on page EL 113 which says taht Tach gets signal from terminal 7 at ECM. I dont know what collor that wire is suppose to be but pin 7 on the ECM is L/B(blue black stripe).
I've tripple checked to make sure i am actualy looking at Pin7 and dotn have it all upside down and stuff.
I apreciate the info on wire collor but i dont kow waht pin it really is.
what do you think man?
PS i THINK FSM i am using is teh Australian FSM....not sure tho. its one on camel-towing.com