View Single Post
Old 01-15-2007, 01:08 PM   #18
MadScientist
Zilvia.net Advertiser
 
MadScientist's Avatar
 
Join Date: Mar 2003
Location: NOLA
Age: 48
Posts: 1,972
Trader Rating: (3)
MadScientist is just really niceMadScientist is just really niceMadScientist is just really niceMadScientist is just really niceMadScientist is just really niceMadScientist is just really niceMadScientist is just really niceMadScientist is just really niceMadScientist is just really niceMadScientist is just really nice
1. S14 Kouki
2. Suspension Setup = Yashio Factory Spec Plus Coilovers (F-10kg/ R-9kg)
Nismo Bushings
Kazama Tie Rod Ends
Tein Tie Rods
Kazama Member Rigid Collars
Tanabe Rear Upper Control Arms
Cusco OS-ALC Strut Tower Bar (Front)
Cusco CB Strut Tower Bar (Rear)
Nismo Power Brace
3. Wheel/Rim Size front & back = (Front - 18x 8.5/ Rear 18x 9.5) (only 17lbs. each)
4. Brand of Wheel/Rim = Advan TCII (Gold)
5. Offset front & back =Front +25/ Rear +29
6. Spacer Size = None as of yet but I may get Yashio Factory 5mm all around... Tire is super close to the Coilovers right now.
7. Tire Size front & back = Advan Neovas AD07 225/40R-18 (Front)/ Yoka ES100 265/35R-18 (Rear)
8. Alignment Specs = None as of yet... still working on Suspension parts.
9. Clear Zbrakes & what size brakes = Yes... Skyline R32 Sumitumo Calipers (The Biggest Stock Caliper without going Brembo). Rear is Full Z32 w/ Drum e-brake.
10. Fender Modifications: rolled/pulled = None yet... I will be rolling the front and rear for better clearance.
11. Picture.. from the side & down the side =
Front Rim & Brake Setup

Rear Rims and Brake setup... you can see there is plenty caliper clearance.

Side Angle shot from the front...


Peace
Drew
__________________
Follow on IG - KoukiTheToolBox
MadScientist is offline   Reply With Quote