|
alright so did some more tests, i had spark a week ago, checked again, now number 1 has no spark, had another ignitor and put it on and tested spark again, now i did have spark on number 1. started it up, ran on all 4 cylinders, thought i had it fixed, but after 1 minute it started missing again. i still had the spark tester on it and noticed i still had spark but it was weak. it was still pushing me in the direction of a bad ignitor. i have 2 and tested both of them per the FSM and they both tested bad. so i ordered another used one that is guaranteed to be good, before i put it on i tested it, it did test bad per FSM. i put it on, same result ran fine for a minute then started misfiring again. has anyone else tested ignitors before, i find it hard to believe i have 3 bad ignitors, it seems unlikely. i want to test the wiring in between ecu and ignitor and igniter to coil pack but the ecu pinout in the s14 FSM is incorrect, anybody know where to find one for a redtop ecu?? and anybody got any suggestions on my problem????
|