Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - KA-T Declaration of Specs THREAD

NinjaGaiden · 02-08-2007, 03:26 PM

1. posts specs/mods
-Stock motor at 40k miles
-GT28RS @ 7lbs
-Top Speed Manifold
-z32TT fuel pump
-stock MAF
-SR 370CC injectors
-FMIC
-K&N Cone filter
-SilkRoad 3in turbo elbow
-Custom 3inch downpipe, but the end flange appears to be 2.25in
-3in RSR catback
-SAFCII with automatic ECU for now. Gettin the JWT ECU tuned at the moment

2. post how long it has lasted
~1000 miles so far. been to the drag strip: Ran 13.8 on 1/4 mile. went to an autoX event and it held up ok as well. Track time coming up Feb24/25. We'll see how it holds up.

3. numbers you've made on the dyno
http://home.myuw.net/gmakx/pics/Silv...A-T%20dyno.jpg

4. what and why it blew up (if applicable)
hasn't blown up yet.

5. experiences, thoughts (pros, cons)
My only complaint is coming from NA KA, I've noticed it is harder to feather the throttle when coming around the corners. I was told to recirc the BOV and it should be much better.

02-08-2007, 03:26 PM	#30
NinjaGaiden Zilvia Junkie Join Date: Aug 2003 Location: Portland, Orygun Posts: 480 Trader Rating: (0)	1. posts specs/mods -Stock motor at 40k miles -GT28RS @ 7lbs -Top Speed Manifold -z32TT fuel pump -stock MAF -SR 370CC injectors -FMIC -K&N Cone filter -SilkRoad 3in turbo elbow -Custom 3inch downpipe, but the end flange appears to be 2.25in -3in RSR catback -SAFCII with automatic ECU for now. Gettin the JWT ECU tuned at the moment 2. post how long it has lasted ~1000 miles so far. been to the drag strip: Ran 13.8 on 1/4 mile. went to an autoX event and it held up ok as well. Track time coming up Feb24/25. We'll see how it holds up. 3. numbers you've made on the dyno http://home.myuw.net/gmakx/pics/Silv...A-T%20dyno.jpg 4. what and why it blew up (if applicable) hasn't blown up yet. 5. experiences, thoughts (pros, cons) My only complaint is coming from NA KA, I've noticed it is harder to feather the throttle when coming around the corners. I was told to recirc the BOV and it should be much better. __________________ Last edited by NinjaGaiden; 02-08-2007 at 03:51 PM..