|
Yes they are the same connector, i cannot comment to whether or not the pins are color coded right. Same goes for the CA18DE in the 88 Pulsar, same connector, no comment on color coding.
On second look, its OBVIOUS. Your 12v Black w/white stripe from the maf plug is going to chasis ground, so you sent the 12V from the Harness to The maf ground, which bounced back and got the other one.
LOL.
Usually you just see these from bad sauder connections, but you REALLY cooked the CRAP out of this.You are going to probably need a new harness, check the whole grounding bundle in the harness, i bet it is now TOAST.
His write up is bad for people who dont understand wiring, because he used the Tomei connector, not the OEM. But i mean, the Tomei Connector attempts to make it BLAREINGLY OBVIOUS THAT RED IS 12V.
You DID NOT DO THAT. Because you dont have a RED WIRE on you Connector, if you just went from pin position based on his write up you would have had it.
|