Quote:
|
Originally Posted by AkinaSpeed
Alright here is the situation, I wanted to try the S13 exhaust cam on the intake side of my S14 KA. I used this pic as a guide from NICO.
According to this there is, 9 links between the marks on the cam sprokets.
1) Tried it the way its on the pic and my car wouldn't start.
2) Move the exhaust cam sproket over one link, so now its down to 8 links. The car started but had advance my timing up to 30 deg to get it to idle smoothly.
My question is where did I go wrong??? I TDC the motor with the cams lobes pointing out everytime. Should I scrap the this mod or should I attemp it one more time??   |
Do it the way it is in the picture, mine works perfectly, I think you just need to adjust your distributor timing. Don't move the cams over, or you might end up with bent valves.
Edit
Quote:
|
Originally Posted by AkinaSpeed
Dude thanks for the help I finally figure it out. You were right initially, the timing was off and plus the first time me and my friend aznpoopy had it running was corret. All I had to do it was reset the dizzy back to TDC and it was done  |
Nevermind.
