The car is a 97 S14 w/S14 SR20 that has had the auto to manual swap done, all this was done by the previous owner. So far I have wired the reverse light, speed sensor, but the neutral position switch I am not so sure anymore. I was told my Wiring Specialties that I need to wire the green w/yellow stripe wire from the sensor to the yellow wire (wire 1) on the 3rd plug down on the side of the fuse box and wired the black wire to ground. I got it all wired up, but then I read
http://ka24development.com/cwilfert/...lectrical.html this and it says I need to run wires to the red/green wire on the ECU.
For the guys who have done this swap before, I know R240NA you seem to be the wiring guy here, am I right or is this website right? I know the website is for the KA engine, mine's an S14 SR.
Only reason I care about this neutral switch is that I know its necessary for the VVT to work.
Thanks