Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

Mattlanta · 03-08-2007, 01:42 PM

Hi Guys,

I have a 95 S14 and my HVAC blower stopped working. So I check the fuse to start with, and sure enough it is blown. No problem, I replace it. The fan was in the off position when I put the new fuse in and nothing happened. I proceed to turn the blower control to 1, and the fuse immediately pops.

I have not started any diag, and I don't have a multi-meter nearby (it's at my friends house). I was hoping one/some of you may have had the same concern or perhaps this is common??? If you guys have any suggestions I would appreciate it!!!

Thanks in advance for any help you can offer...
Matt.

03-08-2007, 01:42 PM	#1
Mattlanta Leaky Injector Join Date: Mar 2006 Location: Atlanta Posts: 68 Trader Rating: (1)	HVAC Question...fuse poppin' Hi Guys, I have a 95 S14 and my HVAC blower stopped working. So I check the fuse to start with, and sure enough it is blown. No problem, I replace it. The fan was in the off position when I put the new fuse in and nothing happened. I proceed to turn the blower control to 1, and the fuse immediately pops. I have not started any diag, and I don't have a multi-meter nearby (it's at my friends house). I was hoping one/some of you may have had the same concern or perhaps this is common??? If you guys have any suggestions I would appreciate it!!! Thanks in advance for any help you can offer... Matt.