Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

drew935 · 03-08-2007, 05:55 PM

ok, I'm running s14se wheels, 2.25 finger gap at -1.3/-1.4 camber in the front
2.5 to 2.75 finger gap in the rear with -1.5 to -1.8 camber.

I have cusco zero2 coilovers and know that you should have enough camber adjustment in the front with even a one finger gap.

Oops, also I forgot to add that I have eccentric bolts in the front since they come with the coilovers. I think that they are set at the 3rd marking on it. So maybe that's what you might need on the fronts. My rucas are stock and maxed out on the setting.

03-08-2007, 05:55 PM	#8
drew935 Zilvia Addict Join Date: Nov 2003 Location: Silver Creek - San Jose Posts: 996 Trader Rating: (0)	ok, I'm running s14se wheels, 2.25 finger gap at -1.3/-1.4 camber in the front 2.5 to 2.75 finger gap in the rear with -1.5 to -1.8 camber. I have cusco zero2 coilovers and know that you should have enough camber adjustment in the front with even a one finger gap. Oops, also I forgot to add that I have eccentric bolts in the front since they come with the coilovers. I think that they are set at the 3rd marking on it. So maybe that's what you might need on the fronts. My rucas are stock and maxed out on the setting. __________________ I'm driving fast -drew