|
Oh, and for the pressure check, you gotta kinda make your own. PVC pipe, a hose coupler, air hose fittings and a really good pressure regulator on your air compressor. I made one and it cost me about 10 bucks. Pull off the MAF, put in your plug/adapter you just made, tighten it down. make sure you set the pressure in the hose of the air compressor before you attach it to your fitting so you dont blow stuff up, I would recomend 10-15 psi. Connect everything and listen for leaks, and maybe some soapy water too. Hope this helps!
__________________
|