i kno this is probably pretty obvious , but im too tired to think straigh so i need some help. i took apart my b m short shifter in order to mount the plate to the top of the trans and in doing so one of the springs in the shifter fell out anyhow no that the trans is back up and im tryin to put the shifter in i cant remember which way everything goes between the small clip the spring and the small spacer that are all inside the shifter. and how the actual shifter sits in it -- in between everything else. and than on top of all that i cant remember if the freakin shifter is bent away or toward you. i kno i kno its NOOB MANIA on my end its crunch time and i got a million things goin on.
