Quote:
Originally Posted by Unit-121
how can check for spark? do you remove the coil pak and start the car, or do you remove the coil pak and the spark plugs and start the car?
I also check the self diagnostic on the ECU and there was no red light on it (poss. removed or broken)
any help thanx
|
to check to see if you have spark or not, you would have to pull the coil pack and the spark plugs out. connect the spark plug to the coil pack and place the tip of the spark plug on a good ground. then just crank it really quick to see if there is spark coming from the spark plug or not. this wouldn't work if you don't place the spark plug near a solid ground source. you must check all four the coils and spark plugs. if any isn't giving out a spark that could be your problem. Also check to see if the ignition pack or coil is working properly, normally they don't give out but still you have to give that a check. the ignition pack was the problem for me.
i hope this helps!!!!
gl on your car dude
